Operation Manual
30
Digital Audio
Use the
buttons to select the “Digital Audio” submenu and
press
to activate the input fi eld. Change the settings using
the
buttons and confi rm and apply by pressing
. Press
the
button to quit the menu.
There are two selection options:
Standard:
The signal on the digital output is encoded in PCM format
AC 3/Dolby Digital:
If you have a Dolby Digital system, you can select “Dolby Digital” mode.
If your satellite receiver receives a Dolby Digital-encoded audio signal,
the digital output is automatically switched to Dolby Digital format
(“AC 3”).
Installation
Note: In both modes you can press the
"
button at any time to check the
current format of the signal on the digital output and of course select a
different one as necessary.
VCR Signals
Use the
buttons to select the “VCR Signals” submenu and
confi rm your selection with
. The following menu is displayed
(see screenshot at left).
TV -> VCR
VCR Signal
If “ON” is selected, the video and audio signals are transmitted from
the TV socket to the VCR socket even in Stand-by mode. At “OFF” you
obtain a lower power consumption.
In VCR playback you can choose between “CBVS/RGB” for a VHS
video recorder and “YC” = S-Video for connection of a S-VHS video
recorder.