Owner's Manual

When entering the platform,

grab the upper edge of the

back-support plate for better

stability. Mind that the struc-

ture is rotational and may

move.

Stand backward to the safety

harness. Adjust its vertical posi-

tion until it ﬁts your waist com-

fortably. Grab and pull forward

the inner harness belts.

Stretch the left belt and pull it

onto your waist. Stretch the

right belt and paste it on the

left one, making sure the Velcro

is well aligned. Press the end

of the belt to ensure it is

fastened ﬁrmly (DANGER:

Fastening the belts too loose

or diagonally may cause safety

hazards, walking direction

deviation etc.)

Entering the Platform:

Put on the dedicated shoes, adjust the laces and pull the

anti-slip strap onto the shoe heel for protection.

Note 1: The KAT Walk C dedicated shoes can only be used to walk on the KAT Walk

C and are strictly prohibited to be used for any other purpose.

Note 2: It is expected that due to the friction force, walking and running may cause

scratches on the platform surface. It will not inﬂuence the normal operation and

performance of the device.