User's Manual

Table Of Contents

Adjustments & Settings

Settings Menu

The Settings menu allow various aspects of the CA49 digital piano to be adjusted. Once adjusted, preferred settings

can be stored to the Startup Setting memory for automatic selection when the instrument is turned on.



Settings menu

Setting name Description Default setting

Reverb Change the type of reverberation added to the sound. -

Transpose Increase or decrease the pitch of the keyboard in semi-tone steps. 0

Tone Control Change the EQ settings of the instrument’s sound. Flat

Low Volume Balance Change the dierence in volume between pianissimo and fortissimo playing. 3

Dual Select the “Dual Mode” function. -

Four Hands Select the “Split Mode” function. -

Tuning Increase or decrease the pitch of the keyboard in 0.5 Hz steps. 440.0 Hz

Touch Change the touch sensitivity of the keyboard. Normal

Smart Mode Change various characteristics of the piano sound. Normal

Damper Noise Adjust the volume of the damper noise sound. 5

Key Volume Adjust the volume of individual keys. O

Startup Setting Store current settings as the default (power-on) conguration. -

Spatial Headphone Sound Select the desired Spatial Headphone Sound mode. Normal

Phones Type Select the type of headphones to be used with the instrument. Normal

Bluetooth MIDI Enable/disable the instrument’s Bluetooth MIDI function. On

MIDI Settings * Change various MIDI settings -

Auto Display O Enable/disable the display’s Auto Display O function. 5 min

Auto Power O Enable/disable the instrument’s Auto Power O energy saving function. -

Factory Reset Restore all settings to the original factory conguration. -

* For information regarding MIDI functions and settings, please download the supplementary PDF manual from the Kawai Global website:

https://www.kawai-global.com/support/manual/



Entering the settings menu, selecting a setting

While the normal playing mode screen is shown in the display:

Press the [1] function button (MENU) to show the Settings menu.

Press the [UP] or [DOWN] buttons to move the selection cursor

over the desired setting.

Press the [1] function button (ENTER) to enter the desired setting.