User's Manual

Table Of Contents

Basic Operation

Metronome



Changing the Metronome time signature/beat

While the Metronome screen is shown in the display:

Press the [UP] or [DOWN] buttons to move the selection cursor

over the Beat setting.

Press the [1] function button (ENTER) to enter the Beat setting.

Press the [UP] or [DOWN] buttons to change the time signature.

* The metronome can be set to one of seven time signatures: 1/4, 2/4,

3/4, 4/4, 5/4, 3/8, and 6/8.

* To reset the metronome to the default 1/4 time signature, press the

[UP] and [DOWN] buttons simultaneously.



Changing the Metronome volume

While the Metronome screen is shown in the display:

Press the [UP] or [DOWN] buttons to move the selection cursor

over the Volume setting.

Press the [1] function button (ENTER) to enter the Volume setting.

Press the [UP] or [DOWN] buttons to change the volume.

* The metronome volume can be set within the range of 1~10.

* The preferred metronome time signature can be stored to the Startup

Setting memory for automatic selection when the instrument is

turned on. Please refer to page 45 for more information.

* The preferred metronome volume can be stored to the Startup Setting

memory for automatic selection when the instrument is turned on.

Please refer to page 45 for more information.