Operation Manual

– 9 –

7. Place the Piano on the top of

the side boards.

8. Set the holes on the bottom of the Piano

fitting to holes of the metal fittings on

the Side Panels.

9. Fasten half with screws (e).

10. And then fasten screws (e) securely

after making sure of the holes in place

so that all screws (e) are lined up

and driven straight.

Caps (J )

Main Unit

( A )

Stand

screws ( e )

M6 x 25

Hole

Metal fitting

Hole

Caps ( J )

Screws ( d )

M6 x 35

11. Fasten Arms and the Piano

with screws (d).

12. Put the caps onto the heads

of the screws (c) (d) ( 8pcs ).

CAUTION!

Pay attention so that your hands or fingers are not caught between the stand and piano.

Be sure to secure the piano to the stand with the screws. If you fail to do so, the unit could

fall from the stand causing damage or personal injury.

Driving or putting screws too tightly or with too much force may cause damaging the Main

Unit.