Operation Manual

14 KAWAI DIGITAL PIANO CN390
TUTORIAL
Basic Operations
TREMOLO
This is a vibrato type effect.
ROTARY
This effect simulates the sound of the Rotary Speaker cabinet commonly
used with electronic organs. There are two types of rotary available (rotary
1-2). Rotary 1 is normal rotary and Rotary 2 is with distortion effect.
The soft pedal is used to change the speed of the rotor between SLOW
and FAST.
TO ADD REVERB
Press the REVERB button. The LED indicator will be turned on to
indicate that reverb is in use. To change the reverb type, use the
VALUE buttons while holding down the REVERB button. The LED
display shows an abbreviation.
TO ADD OTHER EFFECTS
Press the EFFECTS button. The LED indicator will be turned on to
indicate that the effect is in use. To change the effect type, use the
VALUE buttons while holding down the EFFECTS button. The LED
display shows an abbreviation.
To turn off the reverb or effects, press the REVERB or EFFECTS
button again.
Any changes you make to the reverb and the effects are stored with the
preset sound in memory as long as the power is on. When you reselect a
sound, your chosen reverb and effect settings will be recalled along with
the preset sound.
When the power is turned off the effects will be reset to the factory settings.
Chorus
Delay 1
Tremolo
Room
Stage
Hall 3D Room
3D Hall
Rotary 2