Operation Manual

19TUTORIAL: USING THE RECORDER
TUTORIAL
Using the Recorder
RECORDING MORE THAN ONE SONG
The CN piano is capable of recording up to five different songs. Let’s try
recording a second song.
If you followed the procedure in the previous section you have already
recorded Song 1, so now let’s record Song 2.
To select the song number, use the SOUND SELECT buttons with
the song numbers printed under them—CLASSIC GRAND, MODERN
PIANO, ELECTRIC PIANO, DRAWBAR and CHURCH ORGAN. Press
the MODERN PIANO button to select Song 2 while holding down
the REC button. The LED indicator of MODERN PIANO will begin to
flash when the REC button is pressed.
When you are ready to record, just start playing the keyboard.
The CN piano will start recording automatically with the first note you
play.
When you are finished recording, press the PLAY/STOP button.
Now let’s play back the song that you have just recorded.
Hold down the PLAY/STOP button to see which song is selected
for play back. You will see the LED indicator for MODERN PIANO start
flashing. This means that Song 2 is going to be played back. Releasing
the PLAY/STOP button will start play back.
If you would like to listen to a different song, select your desired song
number using the SOUND SELECT buttons while holding down the PLAY/
STOP button and then release the buttons to start play back. The LED
indicator for the selected song will flash when holding down the PLAY/
STOP button