Operation Manual

42 KAWAI DIGITAL PIANO CN390
Reference Section
SELECTING AN EFFECT (EFFECTS BUTTON)
Use the EFFECTS button to add an effect to the sound. There are seven
digital effects; Chorus, Delay1–3, Tremolo and a Rotary1-2 effect that can
be used to enhance the sound of the preset tone.
❏ OPERATION To add an effect to the sound, press the EFFECTS button. The LED
indicator will be turned on and the LED display will show you which
effect is currently selected.
To change the effect type, use the VALUE buttons while holding
down the EFFECTS button.
REVERB (REVERB BUTTON)
Use REVERB button to add reverberation to the sound. There are five
types of reverb built-in: ROOM, STAGE, HALL, 3D ROOM, and 3D HALL.
❏ OPERATION To add reverb to the sound, press the REVERB button. The LED
indicator will be turned on and the LED will display which type of
reverb is currently selected.
To change the reverb type, use the VALUE buttons while holding
down the REVERB button.
The reverb setting is stored with the sound. When you select the same
preset sound again your chosen effect will be recalled, until the instrument
is turned off. Once the power is turned off, the effect will be reset to the
factory setting.
5. EFFECT BUTTONS
Room
Stage
Hall
3D Room
3D Hall
Chorus
Delay 1
Tremolo
Rotary 2