Operation Manual

46 KAWAI DIGITAL PIANO CN390

Reference Section

CHANGING THE TIME SIGNATURE (BEAT BUTTON)

The BEAT button is used to activate the metronome and select your desired

time signature. The CN piano has six settings to choose: 1/4, 2/4, 3/4, 4/4,

5/4 and 6/8.

❏ OPERATION After pressing the BEAT button, the metronome starts counting and

turns on the LED indicator above it. The LED display gives a time

signature (4-4, for example).

Use the VALUE buttons to select the desired time signature.

Press the BEAT button again to stop the metronome.

CHANGING THE METRONOME VOLUME (TEMPO & BEAT BUTTONS)

The volume of the metronome can be adjusted to any level you like.

❏ OPERATION Press the TEMPO and BEAT buttons simultaneously. The LED

displays the volume level of the metronome in numbers from 1 (soft)

to 10 (loud). The factory preset is 5.

To change the volume level, use the VALUE buttons.

Press both buttons simultaneously again to stop the metronome

◆ NOTE All the metronome settings will be reset to the factory preset value after

turning off the power.

4/4

Volume