Operation Manual

49REFERENCE SECTION
Reference Section
INFORMATION TO RECORD
The recorder remembers all the notes you play, usage of the pedals and
the sound selection.
If you record in a transposed key, the song will be played back in the
same key you heard when recording, not in the key that you played with
the keyboard.
MEMORY CAPACITY
The total memory capacity of the recorder is approximately 10,000 notes.
When the memory becomes full, the recorder will automatically stop at
that moment. The data recorded before the interruption will be retained.
All song data will be saved even after turning off the power.
PLAYING BACK A SONG (PLAY/STOP BUTTON)
The PLAY/STOP button is used to start and stop play back of the recorded
songs.
❏ OPERATION Press the PLAY/STOP button and the recorded song will start
playing. Press the PLAY/STOP button again to stop playback.
To select a specific song and part you would like to play back, hold
down the PLAY/STOP button and use the SOUND SELECT buttons.
An LED that is on indicates a song or part that has song data to play back.
A flashing LED indicates that this song is selected to play back. An LED
that is off indicates this song or part have nothing to play back.
USING THE PLAY BUTTON TO START RECORDING
The PLAY/STOP button can also be used to start recording. In this way,
you can insert a blank bar at the beginning of the song.
❏ OPERATION Press the REC button to enable the piano to record first, then press
the PLAY/STOP button. On pressing the PLAY/STOP button, the CN
piano starts recording regardless of whether you press a key or
not.