Operation Manual

51REFERENCE SECTION
Reference Section
10. FUNCTION BUTTONS
SELECTING THE TOUCH SENSITIVITY (TOUCH BUTTON)
The TOUCH button is used to select a different touch sensitivity of the
keyboard from the standard touch of an acoustic piano. You can change
the sensitivity to one of five different settings: LIGHT1/2, HEAVY1/2 and
OFF.
LIGHT: For those still developing finger strength. A louder volume is
produced even when playing with a soft touch. LIGHT2 is lighter
than LIGHT1.
HEAVY: Perfect for those with strong fingers. Requires a heavier touch
to produce a loud volume. HEAVY2 is heavier than HEAVY1.
OFF: A constant volume is produced regardless of how hard the keys
are struck. This setting is suitable for sounds that have a fixed
dynamic range such as Organ and Harpsichord.
❏ OPERATION To change from the standard touch press the TOUCH button. The
LED indicator above the TOUCH button will be turned on to indicate
that the piano is now using a different touch setting.
Use the VALUE buttons to change the type of touch while the TOUCH
button is held down.
Press the TOUCH button again to get back to the standard touch
setting.
Touch selection is global for all the preset tones. You cannot have an
individual setting for each tone.
Once the power is turned off, the setting will be reset to the standard
setting.
◆ NOTE LIGHT and HEAVY do not represent the physical weight of the keys. These
are settings that affect the sensitivity of the keys, which determines the
volume level in response to the key movement.
Light1
Heavy2
Off