User's Manual

47
Assembly Instructions
Appendix
3. Mounting the main body a
Secure the main body to the stand from below, using the four
screws (with the at washer and spring washer) g.
Tighten all screws securely to ensure that the
main body is rmly attached to the stand.
Failing to do so may result in serious injury.
Front view
a a
bb
a
a
b
b
d
a
b
g
g
Ensure that two or more people undertake the
following step of the assembly process.
Lift the main body a and carefully place it onto the stand.
Position the main body towards the front of the stand, so that
the metal tting holes are visible when viewed from above.
Gently slide the main body backwards until the base engages
with the xings inside the side panels and locks into place.
When lifting the main body onto the stand, be
careful not to catch/trap hands and ngers.
1
2
a
b
c
a
b