User's Manual

Assembly Instructions
48
Appendix
4. Connecting the pedal cable and
AC/DC adaptor
Connect the pedal cable to the PEDAL terminal located on the
underside of the main body.
Connect the AC/DC adaptor e to the DC IN terminal.
Use the binders to x the cables in place.
Binder
* Note the direction
* DC 12V for KDP75.
5. Attaching the headphone hook (optional)
If desired, attach the headphone hook to the underside of the
main body using the two tapping screws provided.
a
b
k
6. Adjusting the pedal support bolt
Turn the pedal support bolt anti-clockwise until it makes
contact with the oor and supports the pedals rmly.
When moving the instrument, always adjust or
remove the pedal support bolt, then readjust
when the instrument is in its new position.