User's Manual

11
Preparation
Setting Up the Piano
1. Connecting the power adaptor
Connect the AC power adaptor to the DC IN terminal located
on the underside of the instrument, as indicated below.
* DC 12V for KDP75.
2. Connecting the power adaptor to an outlet
Connect the AC power adaptor to an AC outlet.
3. Turning on the power
Press the POWER switch, located on the right hand side of the
keyboard.
The LED indicator for the SOUND SELECT button will turn on
and the Concert Grand sound will be selected automatically.
4. Adjusting the volume
Move the MASTER VOLUME slider up and down to increase
and decrease the volume level of the instrument’s speakers, or
headphones if connected.
Adjust the volume to a
comfortable listening level
- the middle is often a good
starting point.
Increase
volume
Decrease
volume

Using headphones
Use the jacks located beneath the keyboard on the left hand
side, to connect stereo headphones to the KDP120/KDP75
digital piano.
Up to two pairs of headphones can be connected and used
simultaneously. When a pair of headphones is connected,
sound will not be produced by the speakers.

Adjusting the pedal support bolt
A pedal support bolt is attached at the base of the pedal board
to aid stability when the pedals are pushed. Turn the bolt anti-
clockwise until it makes contact with the oor and supports
the pedals rmly.
When moving the instrument, always adjust or
remove the pedal support bolt, then readjust
when the instrument is in its new position.