User's Manual

33
Adjustments & Settings
Keyboard and Sound Settings
The KDP120/KDP75’s keyboard and sound settings allow various aspects of the instrument to be adjusted.

Keyboard and Sound Settings
Setting name Explanation Default setting
Damper Resonance Adjust the resonance that is heard when depressing the damper pedal. Medium
Reverb Change the type of reverberation added to the sound. On
Touch Change the touch sensitivity of the keyboard. Normal
Low Volume Balance Change the dierence in volume between pianissimo and fortissimo playing. Type3
Tuning Increase or decrease the pitch of the keyboard in 0.5 Hz steps. 440.0Hz
Transpose Increase or decrease the pitch of the keyboard in semi-tone steps. 0
Brilliance Adjust the brightness of the sound. 0
Virtual Technician Select the tuning from 10 preset styles. O
Spatial Headphone Sound Select the desired Spatial Headphone Sound mode. Normal
Phones Type Select the type of headphones to be used with the instrument. Normal
1 Damper Resonance
Depressing the sustain pedal of an acoustic piano raises all dampers, allowing the strings to vibrate freely.
When a note or chord is played on the piano with the sustain pedal depressed, not only will the strings of the
notes played vibrate, but also the strings of other notes, vibrating in sympathetic resonance.
The KDP120/KDP75 digital piano recreates this phenomenon, with the Damper Resonance setting allowing
the volume of this resonance to be changed.

Damper Resonance
Sounds aected by Damper Resonance
Concert Grand Studio Grand Mellow Grand Modern Piano

Damper Resonance type
Damper Resonance type Description Key
O Disables the damper resonance eect. C#2
On (Re)Enables the damper resonance eect. D#2
Small Piano sounds produce a small amount of damper resonance. F#2
Medium
(default) Piano sounds produce a medium amount of damper resonance. G#2
Large Piano sounds produce a large amount of damper resonance. A#2

Changing the Damper Resonance type Operation Guide: SOUND (page 12~13)
Press and hold the SOUND SELECT button, then press the key assigned to the desired Damper Resonance type.
* To disable/enable the damper resonance eect, press the key assigned to the o/on function.
* If the damper resonance eect is disabled, it will be turned on automatically upon selecting a damper resonance type.