Installation Guide
0706
1).Press the red power button to start your massage.
2).The product will first detect your shoulder position and massage point. The chair
will signal you that the scan is complete with consistent beeping sounds. The
shoulder position can then be adjusted manually, and the massage chair will
automatically adjust to a certain angle. When detecting your shoulder position and
massage point, you can choose the memory mode (memo A and memo B) or
automatic mode (auto, comfort, and stretch).
3).If the roller is not in shoulder position, you can adjust it by pressing the up arrow or
down arrow buttons. It can be adjusted up to 6 levels.
Connect method figure
Position of the power switch
Button Description
SHOULDER POSITION
ADJUST (UP BUTTON)
SHOULDER POSITION
ADJUST (DOWN BUTTON)
TIMING
&MODE
ADJUSTING SHOULDER
AIR
PRESSURE
INTENSITY
COMFORT
MEMORY MODE
AUTO
KNEAD
FLAP
KNEAD&FLAP
SPEED
WIDTH
SHIATSU
KNOCK
MANUAL
MODE
BACK STRETCH
AUTO MODE
A B
BUTTOCKS
VIBRATION
AUTO
WIDTH
AIR PRESSURE
MODE
LOWER BODY
ARM
INTENSITY
SPEED
STRONG
WEAK
STRETCH
Method of Usage Method of Usage
1. Press the power switch to ON to turn on the product.
2. Adjust the angle of the back rest, foot rest, and the retracted position of the
foot pad.
Adjust the angle according to your height.
Sit Up Button: Hold down the button to make the back rest slowly rise up while the
calf rest goes down. Release the button to stop. The product will automatically stop
and make fast alarming sounds when it has reached the maximum angle.
Lie Down Button: Hold down the button to make the back rest slowly go down while
the calf rest comes up. Release the button to stop. The product will automatically
stop and make fast alarming sounds when it has reached the maximum angle.
Adjusting the Angle of the Calf Rest
Calf Rest Rise Button: Hold down the button to make the calf rest slowly rise up.
Release the button to stop. The product will automatically stop and make fast
alarming sounds when it has reached the maximum angle.
Calf Rest Down Button: Hold down the button to make the calf rest slowly go down.
Release the button to stop. The product will automatically stop and make fast
alarming sounds when it has reached the maximum angle
3. Start your massage.
Adjust the position of the rollers upward to a suitable
shoulder position.
Adjust the position of the rollers downwards to a suitable
shoulder position.