Warranty

FUNCTIONAL DESCRIPTION
CONTROLS AND COMPONENTS:
1. Trigger Switch
2. Lock-On Button
3. Collet
ASSEMBLY
Always unplug power tool before changing accessories,
changing collets or servicing.
• To loosen collet nut, press the shaft lock button and rotate the shaft by hand
until the lock engages the shaft preventing further rotation.
• DO NOT ENGAGE LOCK WHILE THE
ROTARY TOOL IS RUNNING.
•
Never force a larger diameter shank into a
collet. Always match the collet nut to the
shank size of the accessory you plan to
use.
• Avoid excessive tightening of the collet nut when there is no bit inserted.
1
2
3
4
OPERATING INSTRUCTIONS
Disconnect the power plug from the AC power source
before any assembly, adjustments, or adding/removing accessories.
Following this preventative step reduces the risk of the saw coming on acciden-
tally and the risk of damage to the workpiece and injury to the operator.
Never hold the tool near your face. Accessories like wire brushes or grinding
wheels may come apart during use.
Be careful not to cover the air vents with your hand. This
will cause the motor to overheat.
S M H
10
Slow
8,000-16,000 RPM
Medium
17,000-26,000 RPM
High
27,000-33,000 RPM
4. Cord
5. Brushes
6. Speed Control Dial
6
5
5
9
COLLET
SHAFT LOCK
BUTTON
KEYLESS
CHUCK
ASSEMBLY
COLLET NUT
SPEED
CONTROL
DIAL
Rotary Tool Speed Settings