user manual

ELECTRICAL SYSTEM 16-51

Electric Starter System

Starter Clutch Removal

•

Remove:

Starter Clutch Cover (see Idle Gear Removal)

Idle Gear (Starter Clutch Side, see Idle Gear Removal)

•

Unscrew the starter clutch bot [A], while holding the al-

ternator rotor steady with the rotor holder (see Alternator

Rotor Removal).

Special Tools - Grip: 57001-1591

Rotor Holder (Stopper, M38 × 1.5): 57001

-1658

Rotor Holder: 57001-1666

•

Remove the washer [B].

•

Pull the s tarter clutch gear [A] out of the starter clutch [B].

•

Remove:

Needle Bearing [C]

Starter Clutch

Starter Clutch Installation

•

Install the starter clutch [A] while fitting the alignment

notch [B] of the splines onto the alignment tooth [C].

•

Apply molybdenum disulfide oil solution to the needle

bearing [A], and install it.