user manual

APPENDIX 17-23
Cable, Wire, and Hose Routing
1. Air Switching Valve
2. Face the paint mark upward.
3. Air Switching Valve Hose
4. To the fitting of the holder assy.
5. Holder Assy
6. Clamp
7. Throttle Body Assy
8. To the Radiator
9. Install the starter cover bolt with the
clamp.
10. Run the water hose through the clamp.
11. Water Hose
12. Install the upper crankcase bolt with the
clamp.
13. Oil Filter
14. Oil Cooler
15. Water Hose
16. Clamps
17. Install the clamps as shown illustration
noting to the direction of clip.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com