user manual

3-70 FUEL SYSTEM (DFI)
ECU
CAUTION
Never drop the ECU, especially on a hard surface.
Such a shock to the ECU can damage it.
ECU Removal
•
Remove:
Seats (see Frame chapter)
Junction Box [A]
•
Take the ECU [A] out along with the harness.
•
Disconnect the ECU lead connectors [B].
ECU Installation
•
Connect the ECU connectors, noting the length of the
locks.
Longer Lock [A]
Shorter Lock [ B]
ECU Power Supply Inspection
•
Visually inspect the terminals [ A] of the ECU connectors.
If the connector i s clogged with mud or dust, blow it off
with compressed air.
Replace the main harness if the terminals of the main
harness connectors are cracked, bent, or otherwise dam-
aged.
Replace the ECU if the terminals of the ECU connectors
are cracked, bent, or otherwise damaged.