user manual

ELECTRICAL SYSTEM 16-63
Radiator Fan System
Fan System C ircuit Inspection
•
Disconnect the lead connector [A] from the radiator fan
switch.
•
Using an auxiliary wire [A], connect the radiator fan switch
leads.
If the fan rotates, inspect t he fan switch.
If the fan does not rotate, inspect the following.
Leads and Connectors
Main Fuse and Fan Fuse
Fan Motor
Fan Motor Inspection
•
Remove the f uel tank (see Fuel System (DFI) chapter).
•
Disconnect the 2–pin connector [A] in the f an motor leads.
○
Pull the lead until come out the connector.
•
Using two auxiliary wires [A], supply battery [B] power to
the fan motor.
If the fan does not rotate, the fan motor is defective and
must be replaced.