Riding Toy User Manual

Assembly
9
• Slide the other steering linkage over the hooked end of
the steering column and the other steering linkage.
• Fit the hooked end of the steering column into the hole
in the steering linkage.
8
• Slide a washer onto the end of the steering column.
9
Steering
Linkage
Hooked End
of the
Steering
Column
• Insert the #8 x
3
/
4
” screw through the hole in the end
of the steering column, so that the screw head faces
the front of the vehicle.
• Fit the #8 lock nut onto the end of the screw. Make
sure the rounded side of the lock nut faces the rear
of the vehicle.
• While holding the lock nut steady with an adjustable
wrench, tighten the screw with a Phillips screwdriver.
Do not over-tighten.
10
Washer
• Squeeze both steering linkages together.
• Insert four #10 x
3
/
4
" screws into the steering linkage
assembly. Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
11
Steering
Linkage
Assembly