Service Manual

15-8 FRAME
Side Covers
Left Side Cover Removal
•
Insert the ignition switch key [A] into the left side cover,
and turn the key clockwise until the key slot is vertical.
•
Pull [B] the rear part of the left side cover towards you,
push [C] the left side cover slightly forward, and remove
it.
Left Side Cover Installation
•
Put the front stoppers [A] into the grommets [B] first, then
put the rear stopper into the grommet.
•
Turn the ignition switch key [A] counterclockwise until the
key slot is horizontal [B] to secure the left side cover.
Right Side Cover Removal
•
Remove the screw [A].
•
Pull the r ight side cover evenly outward to clear the stop-
pers.
•
Remove the right side cover.
Right Side Cover Installation
•
Put the stoppers [A] into the grommets [B].
•
Tighten the screw.