User's Manual

15-16 FRAME
Side Stand
Side Stand Removal
•
Raise the rear wheel off the ground with the stand.
•
Remove:
Side Stand Switch Bolt [A]
Side Stand Switch [B]
Spring [C]
Side Stand Nut [D]
Side Stand Bol t [E]
Side Stand [F]
Side Stand Installation
•
Apply grease to the sliding area [B] of the side stand [A].
•
Tighten the bolt and lock them with the nut.
Torque - Side Stand Bolt: 44 N·m (4.5 kgf·m, 33 ft·lb)
•
Hook the spring
•
Install the side stand switch.
○
Apply a non-permanent locking agent to the thread of the
switch bolt.
Torque - Side Stand S wi tch Bolt: 8.8 N·m (0.90 kgf·m, 78
in·lb)