User's Manual
ELECTRICAL SYSTEM 16-67
Meter, Gauge, Indicator Unit
•
In the HOUR setting mode, press the RESET button to
effect the MINUTE setting mode.
○
The minute display flashes on the display.
•
Press the MO DE button to set the minute.
•
In the MINUTE setting mode, press the RESET button to
return to the H OUR/MINUTE setting mode.
•
Press the MODE button to complete the time setting
process.
○
The clock starts counting the seconds as soon as the
MODE button is pressed.
•
Indicate the ODO mode.
•
Check that the display [A] [B] change to the mile and °F,
Mile and °C, km and °F, km and °C display each time by
pushing the RESET bottom while MODE bottom pushed
in.
NOTE
○
Mile/Km Display can alternate between English and
metric modes (mile and km) in t he digital m eter. Make
sure that km or mile according to local regulations is
correctly displayed before riding.
If the display function does not work and adjust, replace
the meter assembly.
Speedometer Check:
•
Connect the 12 V battery and terminals in the same man-
ner as specified in the "Liquid Crystal Display (LCD) Seg-
ments Check".
•
The speed equivalent to the input frequency is indicated in
the oscillator [A], if the square wave (illustrated as shown)
would be input into the terminal [16].
○
Indicates approximately 60 mph in case the input fre-
quency would be approximately 160 Hz.
○
Indicates approximately 60 km/h in case the input fre-
quency would be approximately 100 Hz.