User's Manual

16-84 ELECTRICAL SYSTEM
Fuse
Fuse Inspection
•
Remove the f use (see Fuse Removal).
•
Inspect the fuse element.
If it is blown out, replace the fuse. Before replacing a
blown fuse, always check the amperage in the affected
circuit. If the amperage is equal to or greater than the
fuse rating, check the wiring and related components for
a short circuit.
Housing [A]
Fuse Element [B]
Terminals [C]
Blown Element [D]
NOTE
○
A mass current flows to the battery according to the
state of t he battery which needs refreshing charge when
the engine is turned causing main f use blown out.
CAUTION
When replacing a fuse, be sure the new fuse
matches the specified fuse rating for that circuit.
Installation of a fuse with a higher rating may cause
damage to wiring and com ponents.