Instructions / Assembly

Option 1 Option 2 Option 3 Option 4 Option 5 Option 6 Option 7

INSTALLATION (continued)

Assembling the tubes and canopy assembly to the fixture body

Page 3 of 4

• Guide the fixture wire through the tubes (B, C) and the canopy assembly (A).

• Tighten the canopy assembly (A) and the tubes (B, C) together onto the fixture body (D) until secured

respectively as shown in the diagram.

• There are seven different height options for the user to choose from:

B B B B B B

B B B B

B B

Making the electrical connections

• Strip 3/4 in. of insulation from the wire

ends.

• Connect the black wire from the fixture

to the black wire from the outlet box,

then connect the white wire from the

fixture to the white wire from the outlet

box.

• The bare copper ground wire from the

canopy assembly (A) must loop one turn

under the head of the green ground

screw (H4) on the mounting bracket (H1)

before it is connected to the ground

conductor of the supply circuit.

• Cover the wires with wire connectors

(H5). Tape the wire connectors (H5) and

wires together, and carefully position all

wires inside the outlet box.