Instructions / Assembly

Table Of Contents

Page

of 4

IMPORTANT SAFETY INFORMATION

• This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water

or other liquids.

• Never cover the lamp with any object including cloth or paper as this is a fire hazard.

• Do not handle the bulb immediately after the light is turned off as it will be hot.

• This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. This plug will fit into a polarized outlet only one way. If the plug does not fit fully

into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an

extension cord unless plug can be fully inserted. Do not alter the plug.

PREPARATION

• Before beginning assembly, installation or operation of product, make sure all parts are present. Compare

parts with package contents list and diagram on previous page. If any part is missing or damaged, do not

attempt to assemble, install or operate the product. Contact customer service for replacement parts.

ASSEMBLY

Assembling the tube to the base

• Unscrew the Allen screw (H3) from the tube connector (H2), then remove the tube connector (H2) from

the base (E).

• Tighten the tube connector (H2) to the bottom of tube (D).

• Align the hole on the tube connector (H2) with the hole on the base (E). Using Allen key (H4) tighten the

tube (D) to the base (E) with Allen screw (H3).

NOTE: Before securing the Allen screw (H3), making sure the tube (D) is facing the front of the lamp.