Instructions / Assembly

Page
3
of 4
INSTALLATION (continued)
2
Assembling the shade
• Unscrew the socket ring (H1) from the socket of
the socket assembly (A).
• Place the shade (B) over the socket and secure
with the socket ring (H1).
• Loosen the knob (C) on the top of the tube (D)
to adjust shade (B) to the desired position, then
tighten the knob (C).
Note: remove the plastic cover from the shade
before using.
3
Installing the light bulb
• Install the light bulb (not provide) into the socket.
Use one MAX 60W medium base (E26) type "A"
bulb (recommended).
• Plug into the wall outlet, turn on the switch and
enjoy.
NOTE: You can also use one MAX 9W medium base
(E26) self-ballasted LED bulb. Do not exceed the
recommended wattage.
Switch rocker
A
A
C
B
H1