Instructions / Assembly

Page
4
of 4
CLEANING
Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or
wipe carefully.
To clean the fixture, pull the plug from the wall outlet. Use a dry or slightly dampened, clean cloth to wipe
the exterior surface of the fixture.
TROUBLESHOOTING
The light does not come on at all:
a) Ensure the power supply is turned on.
b) Ensure the cord is plugged into an outlet.
c) Ensure the circuit breaker is set in the “ON” position.
Fuse blows or circuit trips when light is turned on.
a) Check for crossed wires, ensure wiring is correct.