Instructions / Assembly

IMPORTANT SAFETY INFORMATION

• This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water

or other liquids.

• Never cover the lamp with any object including cloth or paper as this is a fire hazard.

• Do not handle the bulb immediately after the light is turned off as it will be hot.

• This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. This plug will fit into a polarized outlet only one way. If the plug does not fit fully

into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an

extension cord unless plug can be fully inserted. Do not alter the plug.

PREPARATION

• Before beginning assembly, installation or operation of product, make sure all parts are present. Compare

parts with package contents list and diagram on previous page. If any part is missing or damaged, do not

attempt to assemble, install or operate the product. Contact customer service for replacement parts.

Page 2 of 4

ASSEMBLY

SHADE ASSEMBLY

Assembling the shade

• Place the shade panel (H3) and top ring (H4) and bottom ring (H5) from the box.

• Attach the top ring (H4) and the bottom ring (H5) to clips on the shade panel (H3) securely into the clips.

• Attach the shade panel (H3) together by velcro.

• Repeat this step for the second shade.

NOTE: Push and pull the shade panel (H3) to be tight before attach it together by velcro.