Instructions / Assembly
ASSEMBLY (continued)
LAMP ASSEMBLY
Page 3 of 4
2
Assembling the harp and the
shade
• Insert the harp (H2) prongs into the saddle of the
fixture body (A) and slide the retaining covers
over joints to secure the harp.
• Unscrew the finial (H1) from the harp (H2).
• Place the shade assembly onto the harp (H2) and
secure with the finial (H1).
H2
H7
H1
1
Installing the upper light bulb
• Install the light bulb (H7) into the socket. Use one
MAX 10W medium base (E26) self-ballasted LED
bulb (9.5 W medium base (E26) self-ballasted
LED bulb included).
NOTE: You can also use one MAX 60W medium
base (E26) type "A" bulb. Do not exceed the
recommended wattage.
A
A
3
Assembling the second lamp
• Repeat steps 1 - 2 for the second lamp.
4
Using the table lamp
• Plug into the wall outlet, turn on the switch and
enjoy. This table lamp has 4 options:
• The night light ON
• The upper light ON
• Both night light and upper light ON
• Off
Switch knob