FORWARD-BRAKE-REVERSE SWITCH For, Models KBPC-240D and KB-225 KB P/N 9339 ! INSTALLATION INSTRUCTIONS ~~ WARNING! Be sure to read safety warning before proceeding, Electrocution can result if you do not read safety warning.
WIRING 1. Remove the (2) Jumpers J8A {connects A1A and A1B) and J8B (connects A2A and A2B) using BLACK azn long-nose pliers. {Rock terminal back and forth WHITE A2B to facilitate removal.) RED ATA 2. Install the leads from the F-B-R switch assembly ORANGE AB onto the following terminals on the main PC GRAY " board. GRAY 2 “Either gray lead can FIG. 3 — CONNECTION DIAGRAM tensor MAIN BOARD REP Toe Oe = ® START YT ma [oho START neo Berm m=08 SEE) Reefer QO.
