Cut Sheet

KB Electronics, Inc.
Model Plug-in Horsepower Resistor® Line Fuse Armature Fuse
KBIC/TC All Models Required Optional Optional
KBMM All Models Required Available Available
KBWD All Models Required External External
KBWS All Models Required Optional Optional
K
BBC All Models Not Required External External
KBCC Non -R Models Required Included Available
KBCC-255 Not Required* External Included
KBCC-240D Not Required External Included
KBCC -R Models Required Included Available
KBPB All Models Required Included Available
KBWT All Models Not Required* External Available
KBMG-212D/-21D Not Required External External
KBRG-240D/-225D Not Required Included Included
KBRG-255 Not Required External External
KBWM All Models Required Included Available
KBMD All Models Required Included Available
KBPC-240D Not Required External Included
KBPC-225 Not Required External External
KBPW-240D Not Required External External
KBRC-240D Not Required External External
KBAC/KBVF All Models Not Required External Not Required**
Optional – Optional fuse mounting kit can be added. Fuses to be purchased separately.
Available – Provisions for mounting the fuse is provided, but the fuse is not included with the control. Consult the Fuse Selection Chart for proper
fuse sizing. Fuse holder can be removed if fuse is not required.
Included – Fuse is included with the control. The armature fuse may have to be changed if the control is to be used with a lower rated motor.
Consult the Fuse Selection Chart for pr
oper fuse sizing.
External – There are no provisions for mounting the fuse on the control. However, we recommend that the customer provide an external means
of fusing the contr
ol. Consult the Fuse Selection Chart for pr
oper fuse sizing.
Requir
ed –
The contr
ol must have a Plug-in Horsepower Resistor® installed, corr
ectly sized by motor horsepower and voltage. Consult the Plug-
in Horsepower Resistor® Selection Chart, on the other side, for proper sizing.
Not Required – This control uses a jumper for current selection. *These models have fixed current selection, and use the CL trimpot for current
adjustment. **These models have I
2
t Electronic Overload Protection, therefore motor fusing is not required.
Plug-in Horsepower Resistor® & Fuses
Cross Reference Chart by Speed Control Model
Note: Fuses are required on all speed control models except KBCC-255.
KB Electronics, Inc.
12095 NW 39th Sr
eet, Coral Springs, Florida 33065-2516 • [phone] • [phone]
Outside Florida Call TOLL FREE [phone] • email – [e-mail]
www.kbelectronics.com
(A40999) – Rev. B – 5/2005
Print Code