User Guide

5
FIGURE 1 – QUICK-START CONNECTION DIAGRAM
L2W L1U V
see Section 3.5, on page 13.
Communication Port for Accessories and Programming:
see Section 9.1,
on page 30.
Single-Phase, 50/60 Hz
AC Line Input:
see Section 9.3,
on page 31.
Motor Connection:
see Section 9.2,
on page 31.
Ground (Earth):
For 60 Hz or 50 Hz Motor Operation:
For Two Times the Rated Motor RPM:
see Section 6.2.1, on page 25.
see Section 6.2.2, on pages 25 and 26.
see Section 6.3, on page 26.
Automatic Start:
see Section 9.6, on page 33.
Manual Start Switch Connection:
Forward/Reverse Speed Selection:
Forward-Stop-Reverse Switch Connection:
Voltage Following Signal Input
in Lieu of Main Speed Potentiometer:
see Section 12, on pages 37 and 38.
see Section 6.4, on page 27.
see Section 9.7, on page 34.
see Section 9.5, on pages 32 and 33.
Diagnostic LEDs:
see Section 9.8, on pages 34 and 35.
Enable Switch Connection,
AC Line Input Voltage Selection
Main Speed Potentiometer (5 KΩ)
see Section 9.4, on pages 31 and 32.
(Supplied) (Front View):
(Dual Voltage Models Only):
see Section 13, on pages 38 – 43.
Adjustable Trimpots:
see Section 6.1, on page 24.
High
Wiper
Low
Chassis
B+
AC LINEMOTOR
B-
J1
CON3
J2
PWR
ST
50/60Hz
F - S - R
CON2
A/M
J1
P2 P3
CON1
X1 X2
P1
DEC/BMINMAXCL ACC COMP
230V 115V
Motor