User Guide

The FWD and REV ACCEL trimpots are factory adjusted to approximately 1 second. The

acceleration times are adjustable over a range of 0.1 to 15 seconds. See fig. 15 for graphical

representation of ACCEL.

Note: The FWD and REV CL trimpots may override the rapid accel and decel settings.

Note: A 4-quadrant ACCEL/DECEL accessory module is available as an option. It provides

separate control of FORWARD acceleration and deceleration and REVERSE acceleration and

deceleration. (KB P/N 8803)

FIG. 15 – ACCEL TRIMPOT ADJUSTMENT

B. Minimum Speed Trimpot (MIN) – The MIN trimpot is used to provide an adjustable minimum

speed when the control is used with an external potentiometer. (See section V, E. p. 7.)

FIG. 16 – MINIMUM SPEED TRIMPOT ADJUSTMENT

C. Deadband Trimpot (DB) – The DB trimpot sets the amount of main speed potentiometer

rotation required to initiate control voltage output. It is factory adjusted to approximately 25%

of rotation.

FIG. 17 – DEADBAND TRIMPOT ADJUSTMENT