User Guide

V. INSTALLING the SIMG FINGER-SAFE COVER

After all adjustments and wiring have been completed on the KBMG and the SIMG,

install the SIMG finger-safe cover onto the KBMG finger-safe cover by snapping the four

(4) clips of the SIMG finger-safe cover into the four (4) slots of the KBMG finger-safe

cover.

Note: Ensure that the yellow and brown field wires (from CON2 of the SIMG to F+ and

F- terminals of the KBMG) are within the shroud of the SIMG finger-safe cover. See fig-

ure 3 on page 7.