Product Info

KKM Co.Ltd KGateway(for KBeacon) Configuration

and MQTT.

5.1 How to verify HTTP API

1. The gateway is setting to MQTT server by default after factory. So please reference

section<< 4.3.4 HTTP configuration>> to change the service’s type.

2. KKM provides a test HTTP server, and the address is:

http://api.ieasygroup.com:8091/postdata

3. After KGateway connect to the HTTP service success, it will flash green LED and

periodically post the KBeacon advertisement data to HTTP server.

4. You can view the reported data on HTTP server by follow address. You should replace the

mac address to your KGateway.

http://api.ieasygroup.com:8091/viewdata.jsp?mac=D03304001182

5.2 How to verify MQTT API

Download mqttfx software:

http://www.jensd.de/apps/mqttfx/1.5.0/

Please reference the document << KGateway API Specification.pdf>> for other details.

6. Trouble shooting

6.1.1 The KGateway flash red LED

If the KGateway connect to HTTPs/MQTT server success, it will flash green LED, otherwise

it will flash red LED.

If the KGateway flash red led, please check the connection by following steps: