Product Info

KKM Co.Ltd KGateway(for KBeacon) Configuration
Copyright by KKM Inc. public 6 / 33
As shown above, each base station has two interfaces with different IP addresses. One of
these IP addresses (referred to as the WAN port) is used to connect to the internet network
(MQTT server), which has a series of firewall rule protection. The other IP address (referred to
as LAN port, also known as the intranet interface) is used for Wi-Fi hotspot broadcasting.
WAN Port: This interface supports Wi-Fi and ETH (network wire). KGateway can
connect to routers via Wi-Fi or network wire, where IP addresses are assigned by routers. The
base station is connected to the MQTT/HTTPs server through this interface, so you need to
ensure that the network between this interface and the MQTT server is interconnected. WAN
address IP address configuration see "4.3.2 configuration WAN port network connection".
LAN port: This interface only supports Wi-Fi. The default IP address of this interface is
192.168.8.1, PC can connect to this interface through Wi-Fi, or the next hopping KGateway can
connect to the internet by Upper level.
If you need to configure the gateway, you can only configure it through Wi-Fi, and you
cannot configure it through the network line (for security reasons, the network line interface
only supports the WAN interface).
4.1 Connect to KGateway
 After power on, the KGateway will automatically broadcast Wi-Fi signal, and the default
Wi-Fi name is “beacongw_mac address”