Technical Data Sheet
Geon™ CPVCMC100
Chlorinated Polyvinyl Chloride
Copyright ©, 2013 PolyOne Corporation. PolyOne makes no representations, guarantees, or warranties of any kind with respect to the Information contained in this document about its
accuracy, suitability for particular applications, or the results obtained or obtainable using the information. Some of the Information arises from laboratory work with small-scale equipment which
may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment. Values reported as “typical” or stated without a range do not state minimum
or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause material properties to shift from the values stated in
the Information. PolyOne makes no warranties or guarantees respecting suitability of either PolyOne’s products or the Information for your process or end-use application. You have the
responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the Information
and/or use or handling of any product. POLYONE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the Information or products reflected by the Information. This data sheet shall NOT operate as
permission, recommendation, or inducement to practice any patented invention without permission of the patent owner.
Rev: 2008-03-11 Page: 1 of 2
Key Characteristics
Product Description
Geon MC100 CPVC is an Injection molding fitting compound. It is listed under NSF Std 14 and 61 and meets or exceeds ASTM
D-1784 Cell Class 23447. MC100 is designed for CTS applications where enhanced resistance at elevated temperatures is
needed. MC100 demonstrates ease of processing with excellent thermal stability.
General
Material Status
Commercial: Active
Regional Availability
Africa & Middle East
Asia Pacific
Europe
North America
South America
Uses
Fittings
Agency Ratings
NSF 14
NSF 61
Forms
Pellets
Processing Method
Injection Molding
Technical Properties
1
Physical Typical Value (English) Typical Value (SI) Test Method
Specific Gravity 1.51 1.51 g/cm³ ASTM D792
PVC Cell Classification 23447 23447 ASTM D1784
Mechanical Typical Value (English) Typical Value (SI) Test Method
Tensile Modulus
2
374000 psi 2580 MPa ASTM D638
Tensile Strength
2
(Yield)
7750 psi 53.4 MPa ASTM D638
Flexural Modulus 400000 psi 2760 MPa ASTM D790
Flexural Strength 13500 psi 93.1 MPa ASTM D790
Impact Typical Value (English) Typical Value (SI) Test Method
Notched Izod Impact ASTM D256A
73°F (23°C), 0.125 in (3.18 mm),
Injection Molded
5.8 ft·lb/in 310 J/m
Hardness Typical Value (English) Typical Value (SI) Test Method
Rockwell Hardness (R-Scale) 119 119 ASTM D785
Durometer Hardness (Shore D) 84 84 ASTM D2240
Thermal Typical Value (English) Typical Value (SI) Test Method
Deflection Temperature Under Load ASTM D648
264 psi (1.8 MPa), Annealed, 0.125 in
(3.18 mm)
217 °F 103 °C
Processing Information
Injection Typical Value (English) Typical Value (SI)
Processing (Melt) Temp 390 to 405 °F 199 to 207 °C
Notes
1
Typical values are not to be construed as specifications.
2
Type I, 0.20 in/min (5.1 mm/min)

Summary of content (2 pages)