Manual

PART IJST
Importmt
Wbm orderiDa please am: the model c.:
pistol for which the put in quadoD is
requirecl
Fig. No. Description Fig. No. Description
3. Frame 35. 'lligger guard
4. Barrel 36. 'lligger guard pin
5. Fixing pin to barrel and 37. Slide stop pin
hammer spring housing 38. Slide stop
6. Sear push pin 39. Left-hand grip
7. Sear push pin spring 40. Right-hand grip
8. Sear push pin housing 41. Grip screw
9. Sear push pin housing pin 42. Grip screw washer
10. Sear 43. Grip screw nut
12. Sear pin 44. Recoil spring
13. Sear rod 47. Slide
14. Trigger 48. Back sight
15. Trigger spring 52. Firing pin
16. Trigger pin 53. Firing pin spring
18. Hammer 54. Firing pin pressure spring
19. Cocking rod 55. Firing pin pressure spring
20. Cocking rod pint sleeve
21. Hammer cocking lever pin 56. Safety-lever
22. Pin to cocking rod and 57. Extractor spring
Iwnmer push pin 58. Safety pin
23. Hammer release lever 59. Extractor pressure pin
25. Hammer pin 60. .Extractor
27. Hammer push pin 62. Magazine body
28. Hammer spring 63. Magazine platform
29. Hammer spring pJug 64. M2gazine spring
31. M2g;azinc 65. ~ine floor plate catch
32. Magazine spring 71. Frame w.asher
33. 1Hgger guard pressure spring 72. Magazine floor plate
34. Thgger guard push pin
WARNING
Always point the muzzle in a safe direction.
Always clean all grease and oil from the chamber and the bore
before loading. Be sure there is no obstruction in the barrel. Any
foreign object in the barrel could cause a burst barrel or other
damage to the firearm as welJ as serious injury to the shooter or
to Others.
Always remember to unload the chamber after removing the
magazine.
Never point a firearm at anything you do not intend to shoot.
Always point the muzzle in a safe direction. Keep your finger off
the trigger until you are ready to fire.
Never leave a firearm cocked and ready to fire. It accidentaDy
could be discharged.
Never fire any pistol with any part of your body over or next to
the ejection pon, or in any position where you could possibly be
hit by the movement of the slide.
Never allow others to stand beside you where they may be hit
by an ejected cartridge case. Make certain there is an
unobstructed path for safe ejection of the fired case.
WARNING
A1ways wear shooting glasses and ear protectors when you an
shooting. Other people who are close by should also be:
protected.
Always make absolutely sure your pistol is unloaded before yo~
disassemble it for cleaning.
Check to be sure that no cleaning ~h or other obstructiol1
remains in the bore or chamber after cleaning. Any foreigJ1
matter in the barrel could result in a burst barrel or othel
damage to the firearm, or cause serious injury to the shooter 01
others.
PARTS AND SBRVICB
To order parts, please furnish the foIJowing: Your name, address.
telephone number, serial number, make and model.
When we receive your request, we will send an order form an~
a parts breakdown with prices. Send all parts order to:
K.B~, INC.
PARTS DBPI'.
P.O.BOX 6625
HARRISBURG, PA 17112-0625
TEL: [phone]
PAX: [phone]
To return firearms for repair, please pack securely in original bOJ
if possible. Also include a detajled description of the problem
Ship the firearms prepaid via UPS or insured U.S. mail to:
K.Bl., INC.
SERVICE DEPr.
548) LINGLESTOWN ROAD
HARRISBURG, PA 17112
TEL: [phone]S
PAX: [phone]
*
Important: All hand guns returned must be returned by :
lkensed FFL dealer only.