User's Manual

User Manual

Date 2018-10-01

Rev 1.4

⑩ When checked, it will automatically connect to the last connected serial port when executing

the program, and send "Open_Comm" command to make it ready to send commands to the

terminal.

When checking, data value of RFID or scanner is transferred to the currently active window

(window with cursor)

[Note] The value may look different depending on the state of language. (Default: English)

When checked, RFID Tag value is converted into ASCII character and displayed. When cleared, it

is displayed as HEX character.

[Note] If the RFID Tag value is not in ASCII format, it may be displayed as an invalid character.

⑪ Select RFID operation mode (Multi/Single).

When Multi Mode is selected, multiple tags are read while the RFID button is held down. When

Single Mode is selected, only one tag is read.

⑫ Adjust the TX output of the DOTR-3000. The tag read distance is adjusted according to the TX

output.

[Note] If TX output is too small, the RFID tag may not be recognized.

⑬ Save the current setting value of the program as XML.