SMARTdiagnostics® IoT HUB Product Guide v.1.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 Contents Revision History .......................................................................................................................................... 3 1 2 Product Overview ............................................................................................................................... 4 1.1 Introduction ........................................................................................................................
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 Revision History Date 5/4/2020 Version 1.0 Author R. Korte, E.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 1 Product Overview 1.1 Introduction The HUB is the central part of a product system that is designed to meet the following needs in the industries we serve: • Fill the gap where deploying KCF’s wireless vibration sensors is not feasible due to access, size, environment, etc.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 at a different place in the cycle when it is. The HUB resolves this issue by allowing an external process to tell The HUB when the asset is running through trigger signals. Finally, it is desirable to collect other data from an asset in addition to vibration data. Examples are pressure, fluid quality, temperature, power consumption, etc. The HUB’s ports are designed to accommodate any type of sensor.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 Internal Connection Diagram: 2.1.3 2.1.4 Environmental Specifications Storage Temperature Range: Operating Temperature Range: IP Rating: Hazardous Certification: -40ºC to 125ºC (-40ºF to 257º F) -40ºC to 85ºC (-40ºF to 185º F) IP67 Class 1, Division 2 (planned) Wireless Radio Specifications Radio: Antenna: FCC ID: IC: KCF DARTwireless™ 2.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 2.1.6 Part Numbers The following variants are available for The HUB. Please use the complete part number for all components to ensure the correct product and configurations are shipped.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 2.2.4 Temperature Sensor Range: -40ºC to 125ºC (-40ºF to 257º F) Resolution: +/- 0.5ºC (+/- 1ºF) 2.2.5 Part Numbers The following variants are available for wired vibration sensor. Please use the complete part number for all components to ensure the correct product and configurations are shipped.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 3 Installation and Setup 3.1 Special Tools Needed In additional to standard tools used for an installation, it is strongly recommended that you have the following tools on hand for installing The HUB, specifically needed for keeping the wires for the sensors safe and organized. • Cable Ties: used to secure and attach cables from the wired sensors to the asset and away from moving parts that could pinch/damage cables or pose a tripping risk.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 d. Trigger Delay – Triggers can be set to a specific delay. Enter the delay in milliseconds e. Minimum Interval – Select the appropriate Minimum Interval from the dropdown list. Intervals can range from 60 seconds up to 24 hours. f. Sampling Frequency – Select the appropriate Sampling Frequency from the dropdown list. Frequency can range from 64 Hz to 8192 Hz.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 3.3.2 Collecting Long Burst Data 6. A long burst allows you to capture readings over a longer period of time in order to determine where to set your Trigger Delays and Intervals. To start a long burst collection, click the Run Long Burst button. The Latest Long Burst column displays “In Progress” to indicate that a long burst is being collected. 7. Once the long burst is complete, a link to the long burst data appears in the Latest Long Burst column.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 4.2 Product Warranty and Return Policy KCF Technologies, Inc.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 designed to detect, avert, or prevent, or that such product may not be compromised, disabled, or circumvented; (iii) Seller has made no representations or warranties, express or implied, to Buyer or for Buyer’s benefit that contradict any of the foregoing; and (iv) “false alarms” and “false readings” from Seller’s products may occur for any number of reasons, and Seller does not warrant against such false results.
IoT HUB Product Guide v.1.0 Lasted Edited: 05/04/2020 SELLER’S LIABILITY FOR ALL CLAIMS, WHETHER BASED ON BREACH OF CONTRACT, NEGLIGENCE, PRODUCT LIABILITY, OR OTHERWISE, SHALL NOT EXCEED THE PRICE PAID BY BUYER FOR SUCH DEFECTIVE PRODUCT. IN NO EVENT WILL SELLER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, LOSS OF USE, LOSS OF PROFIT, AND CLAIMS OF THIRD PARTIES), HOWEVER CAUSED, WHETHER BY THE NEGLIGENCE OF SELLER OR OTHERWISE. 4.
