User's Manual

ve a call. The user can also disable the phone lock code. In this case, your phone w
ill be open to illegal use.
9 When you enter a wrong phone lock code, you can clear it by pressing [END] key. C
onfirm your operation by pressing [#] key or [OK] key.
9 For example : If the phone lock code is set to be 0000, you can enter the code as f
ollow : 0000＃.
9 Provided that you forget the phone lock code, you must contact your dealer or the l
ocal authorized maintenance center.
Link the Network
9 If the SIM lock code is acknowledged, your phone will search for the registration ne
twork automatically or log on to other applicable networks. “Searching …” appears o
n the screen. In the end, you will find the name of the network service provider, ap
pearing in the middle of the screen, to show successful connection and your phone
will turn to the idle mode.
INSERT & REMOVE THE T-FLASH CARD
Your phone supports the T-Flash Plug and Play function when the phone is turned on. However
for safe functioning, it is recommended that you insert/remove the T Flash card after the
phone is turned off.
Switch the phone off and insert the T-Flash card into the rectangle hole on the right side of the
mobile phone. A ‘card’ folder and icon is automatically created in the file manager. Now you
can use T-Flash card.