User's Manual Part 1

DHCP Server supports up to 253 IP addresses for you local

network. Follow the instructions to configure DHCP Server.

Enable DHCP Server:

Select Yes to enable or No to disable DHCP Server.

Domain Name:

Domain Name is the name which you had registered from NIC

(Network Information Center). Ignore this part if managers don’t

apply for a domain name.

IP Pool Starting/Ending Address:

You can use this to set the IP range that the DHCP server can offer.

WINS (Windows Internet Naming Service) Server:

Input a WINS server IP if there is a WINS Server in the local

network.

Apply/Cancel:

Click Apply to save the settings or click Cancel to aboard.

4.2.3 Routing Table