User's Manual

3. Click the “Connect” button. Then the message “Manually Connect by your_computer_name” will

be shown.

4. Now, PC will detect the plug-in of the USB device. The “connect” operation is a software operation

that simulates an actual USB device plug-in. That is to say, when you do a “connect” operation in

the Control Center, PC can then detect a USB device’s plug-in, although actually you do not plug in

any USB device.

5. Then, just use the USB device as if it is connected directly to your PC’s USB port.

6. After you finish using the USB device, click the USB device in the Control Center and then click the

“Disconnect” button to disconnect the USB device. Other PCs can not “Connect” the USB device

until you “Disconnect” that USB device. That is to say, only one PC is allowed to connect the USB

device at the same time.