User's Manual

© 2014 KCodes Corporation. All rights reserved. 6 Series v2 User’s Manual V1.0
1. Edit or create a scope in the DHCP manager of the DHCP daemon. The entries included in this scope
should contain the following parameters:
 range of IP addresses
 subnet mask
 default router IP address
 DNS server IP address
 lease duration
2. Activate the scope. The Server automatically gets the DHCP parameters. If you are using DNS, you
may include at least one DNS server IP address in the DHCP scope or manually set the DNS server IP
address using Server’s web pages or the Control Center.
3.3.6. Setting the IP Address Using the Control Center
1. Install the Control Center. The Control Center is available on the Product CD.
2. Start the Control Center and Auto-searching Server window will appear.
3. If the tool finds multiple Servers in your local area network, then you have to select one Server from
the Server List.
4. Double click the highlighted server (or click the “Configure Server” button) to get the server’s web
pages. Click CONFIG icon.
5. Login with administrator ID (default: admin) and its password (default: admin).