User's Manual


©2014KCodesCorporation.Allrightsreserved.6Seriesv2User’sManualV1.0

4.2.3. InstallationofUSBDeviceDriver
SomeUSBdevices,likeprintersorMFPs(multifunctionprinters),requiretoinstallvendor‐supplieddriver
(usuallyonCDROM).ForthoseUSBdevicesthatdonotneedtoinstalldriver,pleaseskipthissection.
1. InserttheCDROMintotheCDdriveandrunthe“autorun”program.
2. Followtheinstructionsoftheinstall
ationprogramtoinstalldriver.
3. Whentheinstallationprogramasksyoutoplug‐intheUSBdevice,runthe“ControlCenter”.
4. IntheControlCenter,clicktheUSBdeviceserverthathasthedesiredUSBdeviceattached.
5. ClickthedesiredUSBdeviceasthefollowingfigure.

6. Clic
kthe“Connect”button.Thenthemessage“ManuallyConnectbyyour_computer_name”will
beshown,asthefollowingfigure.