User's Manual


©2014KCodesCorporation.Allrightsreserved.6Seriesv2User’sManualV1.0

Chapter9 TheInitButton
TheInitbuttonisusedformaintenance:SimultaneouslypressInitbuttonandturnon(byplugginginthe
poweradaptor)theServeruntilWLANandUSBLEDindicatorssimultaneouslyblink.Afterthat,theServer
willdothefollowingtasks:
 PerformaFactoryDefaultrestorationoftheserver,whichwillrestoremostofthe
paramet
ersandsettingstofactorydefaultvalues.
 PerformaTFTPserver.YoucanupgradenewfirmwareusinganyTFTPclienttool.
Note:Afterperformingthetasksmentionedabove,youhavetoplugoffthepoweradaptorandthenplug
inthepoweradaptortorestarttheServer.