Owner manual

14
Product Overview
KDS Legato 200 Series User’s Manual
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
OPERATING INSTRUCTIONS
POWER CONNECTIONS
1. Plug the power cord in. The Legato 200 Series has a
universal power input connector on the rear of the
unit. The operating range for the Legato 200 Series
series is 100 – 240 VAC, 50-60 Hz.
2. Turn on the main power switch.
!
CAUTION: Do not connect to
firewire ports on a computer.
Damage may occur to the
pump or computer.
H
alf nut Release Knobs
Guide Rods
P
usher Block
L
ead Screw
S
yringe Barrel Clamp
Syringe Holder
Bracket Clamp Knobs
R
un / Fault LED
User Interface
T
ouchscreen
P
rotective Antiglare
Foot Switch
I/O Connector
Fuse Holder
USB Serial Input
(Type B)
RS232 Serial Input
RS485 Connection
(Pump to Pump)
Analog In
(Option)
Main Power
Switch
✐
NOTE: Remove tab under battery cover
to activate battery back-up of date and
time in the pump.
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com
*Power Source -
When powering a pump
in a chain through an RS-
485 cable, toggle switch
to RS-485.